|
MANUFACTURER BY - KORCHEM INDUSTRIES
A/19, Ambica ind. Estate,Ambica Nagar Rd.,
Odhav, Ahmedabad - 382 415
Tel. : +91-79 -2287 5028
Fax : +91-79 -2287 6551, 2297 6267
E -mail :korchem@foundryflux.com
|
 |
SILSET
| The greenish coloured premium foundry Silicate blended With quality breakdown agent gives quality finish to the Casting. |
|
F-SET
- Speciality developed 2 part No Back Phynolic Resin & Hardner.
- This system widely used for faster production and High strength of Mould & Core at economical rate.
|
|
|
SHINESET
- Funane resin based newly developed 2 part No Bake process Utilizes low viscosity liquid resin system and Hardner.
- Mould & Cores develop rapid strength with time and poured in Stipulated time.
- Globally accepted economical binder system Due to Reclaimation of Sand.
- Newly developed resin for Batch Type process.
|
|
|
 |
 |
SILBOND - 11
- Newly developed Semi Liquid Paste used as a Catalyst with Sodium Silicate.
- Silbond-11 is a ideal replacement of – CO2- gas.
- Silbond-11 is Enviorment friendly & Hazardous free product.
|
|
|
KORSET
- A single part, Self setting, No-back core making compound.
- Add only 3% KORSET in sand to make core, having setting Time 3 to 5 hrs.
- Korset is easy to use Economical, require no other additives.
- It gives higher strength, exact dimension accuracy, lowest gas evolution at faster production rate make the system more attractive.
|
|
KORSET - 75
- A premier quality core oil is an economical sand binder System.
- Cores prepared with Kortel-75 gives higher strength Even at lower percentage addition.
- Lowest gas evolution,Easy stripping and fast caring are added advantages.
|
|
|
 |
 |
| SPECTRUM OF ADVANCED FOUNDRY RESIN & BINDER FOR MOULD & CORE MAKING SYSTEM |
FINOCURE PART - A,B,C
- Finocure No Bale 3 Part system is most convenient for all
size of intricate Moulds & Cores.
- It gives good strength, easy striping with lowest gas evolution while maintaining dimensional accuracy even under humid conditions at
economical rate.
|
|
AMICURE
- The oldest PUCN (Poly Urethane Amine Cold Box) system Use fore large volume and high speed accurate core Production without heat curing.
- Amicure suited for Smaller cores with complex configuration with lowest
Gas evolution & excellent tensile strength.
- Best suited fore Auto component with consistent quality.
|
|
MOULD PAINT - 11
To make a super grade foundry paint to be mixed with
Mould Paste & Mould Powders. |
|
MOULD PAINT - 51
| A Thinner/Graphite self igniting type Core & Mould paint. |
|
|
|
|
| |
|
